USER MANUAL
Peplink Balance Series
Appendix A. Restoration of Factory Defaults
To restore the factory default settings on a Peplink Balance unit, perform the following:
For Balance 20/30/210/310:
1. Locate the reset button on the Peplink Balance unit.
2. With a paper clip, press and keep the reset button pressed for at least 10 seconds, until the unit
reboots itself.
For Balance 305/380/580/710/1350/2500:
Use the buttons on front panel to control the LCD menu to go to Maintenance>Factory Defaults,
and then choose Yes to confirm.
Afterwards, the factory default settings will be restored.
All user settings will be lost after restoring the factory default settings.
Regular backup of configuration parameters is strongly recommended.
http://www.peplink.com -186 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
