USER MANUAL
Peplink Balance Series
14.2 Custom Rules for Outbound Policy
Click in the Outbound Policy form.Choose Custom and press the Savebutton.The followingscreen
will then be displayed.
The bottom-most rule is Default. Edit this rule to change the device’s default way to control outbound
traffic for all connections that does not match any rules above it. Click on the service name Defaultto
change its settings.
You may drag and drop a row to rearrange the priority of outbound rules.
By default, Auto is selected for the option Default Rule. You can select Custom in order to change the
Algorithm to be used. Please refer to the upcoming sections for the details of the available algorithms.
To create a custom rule, click Add Rule at the bottom of the table, and the following window will be
displayed:
http://www.peplink.com -86 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
