peplink 20 User Manual

USER MANUAL
Peplink Balance Series
11 Configuration of WAN Interface(s)
The WAN interface settings are located at: Network> Interfaces > WAN
By clicking a connection name,connection settings of that WAN can be modified.
The connection method and details are determined by, and can be obtained from, the ISP.
Connection Settings
WAN Connection
Name
This field is for defining a name to represent this WAN connection.
Enable
This field is for choosing whether to enable this WAN connection.
Connection Method
This option allows you to select the connection method for this WAN connection. Available
options are:
1. DHCP
2. Static IP
3. PPPoE
4. Mobile Internet Connection
See Sections 11.1.1, 11.1.2, 11.1.3 and11.1.4 for configuration details of each connection
method.
Routing Mode
This field shows that NAT (Network Address Translation) will be applied to the traffic
routing over this WAN connection. IP Forwarding is also available when you click the link
in the help text. For further details, please refer to Appendix B, Routing under DHCP,
http://www.peplink.com -57 / 207 - Copyright © 2013 Peplink

peplink 20 Specifications

General

Brand	peplink
Model	20
Category	Network Router
Language	English