USER MANUAL
Peplink Balance Series
8 Basic Configuration
8.1 Connecting to Web Admin Interface
1. Start a web browser on a computer that is connected with Peplink Balance through LAN.
2. To connect to Web Adminof Peplink Balance, enter the following LAN IP address in the address
field of the web browser:
http://192.168.1.1
(This is the default LAN IP address of Peplink Balance)
3. Enter the following to access the Web
Admin Interface.
User Name: admin
Password: admin
(This is the default Admin User login of
Peplink Balance. The Admin and
Read-only User Password can be
changed atSystem > Admin Security
of the Web Admin Interface.)
4. After successful login, the Dashboard of Web Admin Interfacewill be displayed. It looks similar
to the following:
Important Note
The Save
button causes the changes to be saved. Configuration changes (e.g. WAN, LAN, Admin settings, etc.)
take effect after clicking the Apply Changes button on each page’s top right hand corner.
http://www.peplink.com -45 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
