peplink 20 User Manual

USER MANUAL
Peplink Balance Series
22.2 Traceroute Test
The Traceroute Test tool in Peplink Balance traces the routing path to the destination through a particular
Ethernet interface or a SpeedFusion
TM
connection(VPN connections are available on Peplink Balance
210+).
The Traceroute Test utility is located at System> Tools >Traceroute, illustrated as follows:
Tip
A System Administrator can use the Traceroute utility to analyze the connection path of a LAN/WAN connection.
22.3 SpeedFusion
TM
Test
(Available on Peplink Balance 210+)
The SpeedFusion
TM
Test tool can help to test the throughput between different VPN peers.
You can define the Test Type,Direction, and Duration of the test, and press Go!to perform the
throughput test.
The VPN Test utility is located at System > Tools >SpeedFusion
TM
Test illustrated as follows:
http://www.peplink.com -173 / 207 - Copyright © 2013 Peplink

peplink 20 Specifications

General

Brand	peplink
Model	20
Category	Network Router
Language	English