USER MANUAL
Peplink Balance Series
11.4 Bandwidth Allowance Monitor
Bandwidth Allowance Monitor helps keep track of your network usage.Please refer to section 23.8 to view
the usage statistics.
Bandwidth Allowance Monitor
Action
If the featureEmail Notification is enabled, you will be notified through email when usage
hits 75% and 95% of the monthly allowance.
If the box Disconnect when usage hits 100% of monthly allowance is checked, this
WAN connection will be disconnected automatically when the usage hits the monthly
allowance. It will not resume connection unless this option has been turned off or the usage
has been reset when a new billing cycle starts.
Start Day
This option allows you to define which day in the month each billing cycle begins.
Monthly Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN connection
each month.
Disclaimer
Due to different network protocol overheads and conversions, the amount of data as reported by this Peplink device
is not representative of actual billable data usage as metered by your network provider. Peplink disclaims any
obligation or responsibility for any events arising out of the use of the numbers shown here.
http://www.peplink.com -70 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
