USER MANUAL
Peplink Balance Series
23.3 Client List
The client list table is located at Status > Client List.It lists DHCP client IP address, their Name
(retrieved from DHCP reservation table or defined by users), current Download and Upload rate and
MAC address that the Peplink Balance has offered IP addressesto since it is powered up. Clients can be
imported into DHCP Reservation table by clicking the button on the right-most column. Further
update the record after the import by going to Network > LAN.
If PPTP Server in section 20.2,SpeedFusion
TM
in section 0, or WLAN Controller in section 17is enabled,
you may see the corresponding connection name would be listed in the field of Name.
http://www.peplink.com -178 / 207 - Copyright © 2013 Peplink
To Next Page
Loading...
Need help?
General
