Pioneer PDP-507CMX User Manual

239
Integrator Mode
17) COLOR MODE Setting
In addition to the normal operation mode (NORMAL), this display has a (STUDIO) mode for use in a TV studio. The
adjustment values for ‘PICTURE’ and ‘SCREEN’ can be set independently.
(Refer to section 5.4.4, “PICTURE, White Balance and SCREEN position Adjustment Values Memory Area Tables”
(pg. 257).)
Change the settings to meet the desired usage.
Factory setting: NORMAL
1 Enter the integrator mode.
(Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).)
2 Select ‘OPTION’.
3 Place the cursor on ‘COLOR MODE’ then press the [SET]
button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
When the ‘COLOR MODE’ setting is changed, all input
functions as well as the ‘PICTURE’ and ‘SCREEN’
adjustment values for the input signal are changed.
The ‘COLOR MODE’ setting is common for all inputs.
INTEGRATOR INPUT1
CHANGE
SCREEN SETUP OPTION
FAN CONTROL
OSD
FRONT I ND I CATOR
COLOR MODE
PRO USE
FRC
PICTURE
:
:
:
:
SET EXITMENU
AUTO
NORMAL
ON
ON
Screen 3
STUDIO
NORMAL
2
3

Pioneer PDP-507CMX Specifications

General

Brand	Pioneer
Model	PDP-507CMX
Category	Monitor
Language	English