2.32
MAINTENANCE
Auxiliary Brake Pedal
The hydraulic auxiliary brake system requires no adjustment.
Frequently check the brake fluid level for the auxiliary brake
system by viewing the level in the master cylinder reservoir
located underneath the front rack assembly (see Figure 2-31).
• Check the effectiveness of the auxiliary brake by
applying approximately 50 lbs. (23 kg) of downward
force on the pedal.
• If brake pedal requires an excessive amount of travel to
operate, inspect brake pads, pedal, linkage springs, rear
master cylinder and hoses for wear, damage or leakage.
Replace components as needed.
Foot Brake
PartShark.com
877-999-5686
To Next Page
Loading...
Need help?
General
