EasyManuals Logo
Home>Polaris>Offroad Vehicle>GENERAL 2016

Polaris GENERAL 2016 User Manual

Polaris GENERAL 2016
690 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #404 background imageLoading...
Page #404 background image
8.44
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
4. Thread the reservoir can to the coupler using
threadlocker.
5. Fill the main body with shock oil.
6. Install the shaft assembly.
NOTICE
Slowly cycle the shaft up and down to bleed any air
trapped under the piston.
7. With the seal case bleed screw out, push the seal
case down until it is 1.500” from top of the main body.
8. Making sure oil is on top of the seal case, pull up on
the shaft until the piston stops against the seal case.
Ensure the seal case is still 1.500” from the top of the
main body.
9. Install the bleed screw in the seal case and wire ring.
Make sure the wire ring is in its groove.
10.Slowly add nitrogen. Once the seal case seats
against the wire ring, then add all of the nitrogen
pressure.
11. Evenly tap down the wiper cap into the main shock
body.
STEERING / SUSPENSION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris GENERAL 2016 and is the answer not in the manual?

Polaris GENERAL 2016 Specifications

General IconGeneral
BrandPolaris
ModelGENERAL 2016
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals