11
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
11.101
DIGITAL WRENCH® VERSION AND UPDATE
ID
Knowing what Digital Wrench® version and update is
installed will help determine which updates are required.
NOTICE
Versions and updates are subject to change.
1. Open the Digital Wrench® software. Locate the
version ID shown on the lower right side of the Digital
Wrench® start-up screen.
2. Proceed to http://polaris. diagsys. com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench®.
NOTICE
Always operate with the latest update.
DIGITAL WRENCH® UPDATES
Updates are released for Digital Wrench® via the
Internet at: http://polaris. diagsys. com. The Digital
Wrench® website can also be accessed through the
dealer website at: www.polarisdealers.com.
NOTICE
Only authorized Polaris dealers and distributors can
access the dealer website.
1. Log on to www.polarisdealers.com.
2. Locate the “Service and Warranty” drop-down
menu.
3. Click on “Digital Wrench Updates”.
4. The Digital Wrench® portal website should appear in
a new web browser.
5. Click on “Digital Wrench Version Updates”.
NOTICE
You must already have the current version installed
before adding an update. Updates will not install if you
are using an older version loaded on your PC.
ELECTRICAL
To Next Page
Loading...
Need help?
General
