Polaris GENERAL 2016 User Manual

11
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
11.87
2. Disconnect the transmission switch harness by lifting
the connector lock and pulling on the connector. Do
not pull on the wiring.
3. Test the transmission switch continuity readings for
each gear position and compare to the specification
table below.
GEAR
POSITION
RESISTANCE VALUE
WHEN MEASURED AT SWITCH
TERMINALS A AND B
HIGH 620 Ω
LOW 300 Ω
NEU
160 Ω
REV 75 Ω
PARK 24 Ω
SEAT BELT SWITCH
NOTICE
If the circuit is open (buckle undone) vehicle speed will
be limited to 15 mph. If the circuit is closed (buckle
inserted), the vehicle will function normally.
TESTING
1. Disconnect the harness
q
running to the driver’s seat
belt latch.
2. Using a multi-meter, measure between both pins on
switch.
SEAT BELT
DISENGAGED
SEAT BELT ENGAGED
457 kΩ 187 kΩ
ELECTRICAL

Polaris GENERAL 2016 Specifications

General

Brand	Polaris
Model	GENERAL 2016
Category	Offroad Vehicle
Language	English