11
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
11.61
FUSE BOX REPLACEMENT
1. Remove the driver seat.
2. Remove the battery access panel and disconnect the
battery negative (-) cable.
3. Remove the fasteners holding the fuse box to the
vehicle.
4. Disconnect the fuse box from the main harness and
remove from the vehicle.
5. To install, reverse installation procedure. Torque fuse
panel fasteners to specification.
TORQUE
Fuse Box Fasteners:
35 lb-in (4 Nm)
RELAY CIRCUITS (2017–2018)
Chassis Relay
Provides power to the following systems:
• Lights (Headlights / Taillights)
• Drive (AWD)
• Accessory (12V Receptacles / Accessory Options)
WIRE COLOR
PIN
FUNCTION
Red / Dark Blue
33
Coil power from EFI
B+ #2 Splice
Red 34 High side power from
Start Solenoid B+
Red / Dark
Green
37 High side output to
Chassis Splice
Grey
38
ECU controlled
ground
Fuel Pump Relay
provides power to the following system:
• Fuel Pump
WIRE COLOR
PIN
FUNCTION
Red / Dark Blue
25
Coil power from EFI
B+ #2 Splice
Orange 26 High side power from
R/S B+ #1 Splice
Red / Blue
29 High side output to
fuel pump
Dark Green /
Yellow
30 ECU controlled
ground
EFI Relay
provides power to the following systems:
• Fuel Injectors
• Ignition Coil
• Fan Relay
• Fuel Pump Relay
WIRE COLOR
PIN
FUNCTION
Red / White
17
Coil power from B+
Unswitched Fused #1
Splice
Red 18
High side power from
EFI fuse
Red / Dark Blue
21 High side output to
EFI B+ Splice
Dark Green /
Yellow
22
ECU controlled
ground
ELECTRICAL
To Next Page
Loading...
Need help?
General
