Polaris GENERAL 2016 User Manual

10.54
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
5. Install the fasteners holding the rocker panel to the
vehicle.
TORQUE
Rocker Panel Fasteners:
3.5 lb-ft (4.7 Nm)
6. Install the rear fender on the vehicle. Connect the
clutch intake hose to the LH rear fender and tighten
hose clamp until taught, do NOT overtighten hose
clamp. Install the fasteners holding the rear fender to
the vehicle and rocker panel. Torque the fasteners to
specification.
TORQUE
Rear Fender Fasteners:
3.5 lb-ft (4.7 Nm)
7. Install the fasteners holding the rear fender flair to the
rear fender.
8. Close the cargo box and secure in position.
9. Install the center lower fender tabs into of the rocker
panel. Install the fasteners holding the center lower
fender to the vehicle. Torque fasteners to
specification.
TORQUE
Center Lower Fender Fasteners:
3.5 lb-ft (4.7 Nm)
10.Install the fasteners holding the center upper fender
to the vehicle.
BODY / FRAME

Polaris GENERAL 2016 Specifications

General

Brand	Polaris
Model	GENERAL 2016
Category	Offroad Vehicle
Language	English