Polaris GENERAL 2016 User Manual

10.60
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
8. While pushing the door upward and inward, tighten
the four 13mm door hinge fasteners
t
.
TORQUE
Door Hinge Fasteners: 27 lb-ft (37 Nm).
9. Check the front door gap on its leading edge.
NOTICE
If door gap adjustment is needed, make a small
adjustment to the striker pin vertical position and redo
steps 2,7, and 8.
10.Verify the door properly opens, closes, and locks.
11. Install plastic door panel covers.
Rear Door Alignment
1. Loosen 13mm hinge fasteners
q
.
2. Remove hinge fasteners and remove plastic
packaging clip.
3. Close door and guide door latch into striker.
4. Ensure the door is fully locked
BODY / FRAME

Polaris GENERAL 2016 Specifications

General

Brand	Polaris
Model	GENERAL 2016
Category	Offroad Vehicle
Language	English