GENERAL INFORMATION
2.22
6. Remove the radiator.
Inlet Radiator Hose
Outlet Radiator
Surge Tank
Hose
Mounting
Hose
Temp. Sensor Plug
Cap
Screws
AIR FILTER/ BREATHER
FILTER SER
VICE
It is recommended that the air filter be replaced
annually. When riding in extremely dusty conditions
replacement will be required more often.
The filter should be inspected periodically before each
ride, using the following procedure.
1. Lift the box to access the filter box cover .
2. Remove clips (2) from air box cover and remove
cover. Inspect the gasket. It should adhere tightly
to the cover and seal all the way around.
3. Remove air filter assembly. Do not clean the main
filter, the filter should be replaced.
4. Inspect main element and replace if necessary. If
the filter has been soaked with fuel or oil it must be
replaced.
Filter
Breather Filter
Cover
Cover Seal
Installation
1. Reinstall the filter into the air box container. Be
sure the filter fits tightly in the air box.
NOTE: Apply a small amount of general purpose
grease to the sealing edges of the filter before
installing.
2. Check air box. If oil or water deposits are found,
drain them into a suitable container .
NOTE: Service more frequently if vehicle is operated
in wet conditions or at high throttle openings for
extended periods.
3. Install air box cover and secure with clips.
To Next Page
Loading...
Need help?
General
