GENERAL INFORMATION
2.32
TIRE PRESSURE
CAUTION:
Maintain proper tire pressure. Refer to the warning
tire pressure decal applied to the vehicle.
Tire Pressure Inspection (PSI - Cold)
Front Center & Rear
10 10
TIRE INSPECTION
S Improper tire inflation may affect
vehicle maneuverability.
S When replacing a tire always use
original equipment size and type.
S The use of non-standard size or type
tires may af fect vehicle handling.
Tire Tread Depth
Always replace tir es when t read dept h is worn to
1/8² (3 mm) or less.
T read
Depth 1/8I (3 mm)
WARNING
Operating a RANGER with worn tires
will increase the possibility of the vehicle
skidding easily with possible loss of con-
trol.
Worn tires can cause an accident.
Always replace tires when the tread
depth measures 1/8² (.3 cm) or less.
FRAME, NUTS, BOLTS,
F
ASTENERS
Periodically inspect the torque of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place. Refer to specific
fastener torques listed in each chapter.
S Check all rear suspension components
for wear or damage.
FRONT SUSPENSION
Rear Spring
Adjustment Cam
Shock Spanner Wrench
(PN 2870872)
S Compress and release front suspension.
Damping should be smooth throughout
the range of travel.
S Check all front suspension components
for wear or damage.
S Inspect front strut cartridges for leakage.
To Next Page
Loading...
Need help?
General
