To Next Page

To Previous Page

3.40

9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service

Manual

10. Evenly loosen the four bolts retaining each rear

camshaft carrier

and carefully lift the carriers off

the camshafts.

11. Mark the intake

and exhaust

camshafts to

ensure proper assembly.

12. Carefully remove camshafts from the cylinder head.

CAMSHAFT SPROCKET INSPECTION

Inspect cam sprocket teeth for wear or damage

Replace timing chain and sprockets if worn or damaged.

CAMSHAFT / CAMSHAFT BORE INSPECTION

Inspect all main journals and cam lobes as described

below and compare to specifications. Replace camshaft

(s) or cylinder head if worn beyond service limit or if any

surface is pitted or damaged.

1. Visually inspect each cam lobe for wear or damage.

2. Measure the height of each cam lobe from the base

circle to highest point on the lobe using a

micrometer. Compare to specification.

NOTE

Replace camshafts if damaged or if any part is worn

past the service limit.

MEASUREMENT

Camshaft Lobe Height:

Intake: 1.5256 ± .0015" (38.75 ± .040 mm)

Service Limit: 1.5220" (38.66 mm)

Exhaust: 1.4961" ± .0015" (38.00 ± .040 mm)

Service Limit: 1.4925" (37.91 mm)

3. Visually inspect each camshaft journal for scoring,

wear or damage.

ENGINE / COOLING SYSTEM

Polaris RZR S 1000 2016 User Manual

Questions and Answers: