To Next Page

To Previous Page

5.30

9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service

Manual

9. Install left hand nut and spacer onto puller rod and

tighten by hand. Turn puller barrel for further tension if

needed.

10.Turn clutch sheave counterclockwise until bushing is

removed and sheave comes free.

11. Remove nut (left hand thread) from puller rod and set

aside.

12.Remove adapters from puller.

13.Remove bushing and removal tool from adapters.

Discard bushing.

CLUTCH BUSHING INSTALLATION

1. Install Number Two Puller Adapter

onto puller.

2. Install the Adapter Reducer

onto puller.

3. Apply Loctite® 648 evenly to bushing bore inside

moveable sheave.

4. Install sheave face down on puller.

5. Install new bushing on installation tool

and install

assembly into sheave.

6. Install left hand thread nut onto puller rod and hand

tighten against installation tool.

7. Turn clutch sheave counterclockwise, making sure

bushing is drawn straight into bore. Continue until

bushing is seated.

8. Remove nut from puller rod and set aside.

9. Remove installation tool and clutch sheave from

puller.

PVT SYSTEM

Polaris RZR S 1000 2016 User Manual

Questions and Answers: