Polaris RZR S 1000 2016 User Manual

10
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
10.25
DOORS
DOOR PANEL / LATCH REPLACEMENT
1. Remove the T-25 fasteners retaining the door panel
to the door frame. Remove the door panel.
2. Remove the two fasteners
q
retaining the door latch
to the door frame.
3. Install new latch onto the door frame. Torque
mounting fasteners to specification.
TORQUE
Door Latch Fasteners:
8 ft-lb (11 Nm)
4. Install the door panel onto the door frame. Torque
fasteners to specification.
TORQUE
Door Panel Fasteners:
22 in-lb (2 Nm)
5. Adjust the door so it properly opens and latches.
Refer to Door Adjustment, page .
DOOR ADJUSTMENT
NOTE
The non-S models will have a straight door with only
one adjuster at the top and two on the bottom. The
same adjustment procedure applies.
1. Close the door and keep it closed during entire
adjustment for proper functional fit.
2. Loosen the M8 bolts
q
holding the door assembly to
the hinge brackets using a T-40 Torx driver.
BODY / FRAME

Polaris RZR S 1000 2016 Specifications

General

Brand	Polaris
Model	RZR S 1000 2016
Category	Offroad Vehicle
Language	English