The SoundStructure VoIP Interface
12 - 37
Configuring a Line Registration
To configure a line registration, navigate to the Settings > Lines option and
select a line. The line settings appear as shown next.
Enter the information as described in the table below.
Name Possible Values Description
Display Name Any string up to 256
characters
The display name used in SIP signaling that your phone
uses as the default caller ID. This name is displayed on
the call recipient's phone.
Address Any string up to 256
characters
Enter a line identification address that the phone uses to
register with the server. The address may include a user
name, or the host of the phone's SIP URI. For example,
if the phone's line is 1002@polycom.com, enter 1002 as
the SIP where polycom.com is the server. Or, you can
enter 1002@polycom.com. Any address entered will be
displayed as the phone's line if the display name and
label are not specified.
Authentication
User ID
Any string up to 256
characters
Enter the user name used to authenticate this line
registration (if applicable).
Authentication
Password
Any string up to 256
characters
Enter the password used to authenticate this line
registration (if applicable).
Label Any string up to 256
characters
Enter the text that will display next to the associated line
key. If a label isn't defined, the label will be derived from
the user part of the address.
To Next Page
Need help?
General
