Polycom SoundStructure C16 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
12 - 48
server address, username, and password information as shown in the follow-
ing table.
Changes to the network settings for the SoundStructure VoIP Interface are
stored into the permanent memory of the SoundStructure VoIP Interface
immediately when you press the Apply button. Note that this behavior is dif-
ferent from how changes are made to the SoundStructure device’s network
settings. SoundStructure device network changes require that you save the
project before the network setting changes are stored permanently into the
SoundStructure device.
Name Possible Values Description
Type FTP, TFTP, HTTP,
HTTPS, FTPS
The protocol that the SoundStructure VoIP Interface will use
to obtain configuration and phone application files from the
provisioning server.
Address dotted-decimal IP
address
OR
domain name string
OR
URL
All addresses can be
followed by an optional
directory and optional
filename.
The provisioning server to use if the DHCP client is disabled,
the DHCP server does not send a boot server option, or the
Boot Server parameter is set to Static. The SoundStructure
VoIP Interface can contact multiple IP addresses per DNS
name. These redundant provisioning servers must all use
the same protocol. If a URL is used it can include a user
name and password.
Note: ":", "@", or "/" characters can be used in the user
name or password these if they are correctly escaped using
the method specified in RFC 1738.
Username any string The user name used when the SoundStructure VoIP
Interface logs in to the server if required for the selected
server Type
Password any string The password used when the SoundStructure VoIP
Interface logs into the server if required for the selected
server Type.
Note: If the Server Address is a URL that includes the user
name and password, the password field will be ignored.
Changing the network settings may cause the SoundStructure VoIP Interface to
reboot. When this happens, you may hear a series of tones played out the local
loudspeaker system indicating that the SoundStructure VoIP Interface has initiated
a reboot. If a reboot happens, the wiring page in SoundStructure Studio will update
the status of the SoundStructure VoIP Interface to ‘booting’ and the rear panel
status LED will blink until the device has finished booting and then turn solid once
the card has finished booting.

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English