System Display
Polycom, Inc. 116
System Name for Wireless Content Connections
When the Polycom Trio 8800 system is registered with Skype for Business, you can determine if the Skype
for Business display name shows in the list of available devices that supported Apple, Windows, or Android
devices can connect with to share content using AirPlay or Miracast.
The Airplay or Miracast devices search for a system name, which you can specify in one or more of the
following parameters. The device displays the name you configure for the system in the following priority in
order:
●
content.airplayServer.name
for AirPlay or
content.wirelessDisplay.name
for Miracast
● system.name
●
displayname
(on the Skype for Business server)
● reg.1.displayname
● reg.1.label
● reg.1.address
● Default system name based on the model and MAC address
Status Message Parameters
Parameter
Template Permitted Values
up.status.message.flash.rate
features.cfg
Specify the number of seconds to display a message before moving to
the next message.
2 seconds (default)
1 - 8 seconds
up.status.message.1
up.status.message.2
up.status.message.3
up.status.message.4
up.status.message.5
<message line one>
<message line two>
<message line three>
<message line four>
<message line five>
To Next Page
Loading...
Need help?
General
