Polycom Trio Visual+ User Manual

Network
Polycom, Inc. 125
Extended Link Layer Discovery Protocol (LLDP)
The Link Layer Discovery Protocol (LLDP) is used by network devices to advertise their identity, capabilities,
and neighbors on an IEEE 802 local area network, principally wired Ethernet. LLDP is enabled by default.
Media Endpoint Discover (MED) capabilities include:
● Network policy discover
● Endpoint location identification discovery
● Extender power discovery required for endpoint
Configuring LLDP Fast Start Count
Fast start count enables a device to initially advertise itself over the network at a fast rate for a limited time
when an LLDP-MED endpoint has been newly detected or connected to the network.
Configure Wi-Fi Network Parameters
Parameter Function template > parameter
Enable the Wi-Fi radio. device.wifi.enabled
Enter the two-letter code for the country in which you
enable the Wi-Fi radio.
device.wifi.country
Enable DHCP for Wi-Fi. device.wifi.dhcpEnabled
device.wifi.dhcpBootServer
The IP address of the wireless device if not using
DHCP.
device.wifi.ipAddress
The network mask address of the wireless device if not
using DHCP.
device.wifi.subnetMask
The IP gateway address of the wireless device if not
using DHCP.
device.wifi.ipGateway
The SSID of the wireless network. device.wifi.ssid
Specify the wireless security mode. device.wifi.securityMode
The length of the hexadecimal WEP key. device.wifi.wep.key
The hexadecimal key or ASCII passphrase. device.wifi.psk.key
The EAP to use for 802.1X authentication. device.wifi.wpa2Ent.method
The WPA2-Enterprise user name. device.wifi.wpa2Ent.user
The WPA2-Enterprise password. device.wifi.wpa2Ent.password
device.wifi.radio.enable2ghz
device.wifi.radio.enable5ghz

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English