Call Controls
Polycom, Inc. 98
Dial Plans
This section on dial plans includes information on dial plan normalization, multiple emergency number dial
plans, parameters you can configure on your provisioning server, and examples of supported and
unsupported dial plans.
Dial Plan Normalization
Dial Plan Normalization enables you to configure dial plans on the Skype for Business server or on your
provisioning server.
For more information on regular expressions used on Skype for Business server, see .NET Framework
Regular Expressions on Microsoft Developer Network.
Multiple Emergency Number Dial Plan
When registering Polycom devices with Skype for Business, you can configure multiple emergency
numbers on the Skype for Business server. When you correctly configure the multiple emergency numbers
site.cfg dialplan.routing.serve
r.x.transport
Set the DNS lookup of the first server to
use and dialed if there is a conflict with
other servers.
DNSnaptr (default)
TCPpreferred
UDPOnly
TLS
TCPOnly
For example, if
dialplan.routing.server.1.transpo
rt
= "UDPOnly" and
dialplan.routing.server.2.transpo
rt
= "TLS", then UDPOnly is used.
Yes
site.cfg dialplan.userDial.time
Out
Specify the time in seconds that the
phone waits before dialing a number
entered while the phone is on hook.
0 (default for Generic Profile)
0-99 seconds
You can apply
dialplan.userDial.timeOut
only
when its value is lower than
up.IdleTimeOut
.
No
Temp l at e Parameter Permitted Values
Change Causes
Restart or Reboot
To Next Page
Loading...
Need help?
General
