Polycom Trio Visual+ User Manual

Call Controls
Polycom, Inc. 91
Configure Hybrid Line Registration using the Web
Configuration Utility
You can configure the phone to support the Hybrid (Skype for Business/ Open SIP) Registration from
phone's Web Configuration Utility page after enabling the feature using configuration parameter.
Make sure the to set the Base profile as Skype for Business on the Polycom Trio 8800 system.
To configure a hybrid line registration using Web Configuration Utility:
1 Sign in to the Polycom Trio 8800 system's Web configuration Utility page using Admin account.
If configuring Skype for Business on Line 1, sign in to the Web Configuration Utility as Skype for
Business user.
2 On the Web Configuration Utility page, navigate to Settings > Line.
The number of lines enabled to configure is displayed.
3 Configure the Skype for Business registration on Line 1.
4 Configure the Open SIP registration on Line 2.
You can configure other lines with Open SIP registration.
International Dialing Prefix
Enter a '+' symbol before you dial an international phone numbers to identify to the switch that the phone
number you are dialing is international.
Configuring International Dialing Prefixes
The following parameters configure the international dialing prefixes.
International Dialing Prefix Parameters
Parameter
Temp l at e
Permitted Values
call.international
Dialing.enabled
site.cfg
This parameter applies to all numeric dial pads on the phone, including for example, the
contact directory.
Changes you make to this parameter cause a restart or reboot.
1 (default) - Disable the key tap timer that converts a double tap of the asterisk "*" symbol
to the "+" symbol to indicate an international call. By default, this parameter is enabled so
that a quick double tap of "*" converts immediately to "+". To enter a double asterisk "**",
tap "*" once and wait for the key tap timer to expire to enter a second "*".
0 - When you disable this parameter, you cannot dial"+" and you must enter the
international exit code of the country you are calling from to make international calls.
call.international
Prefix.key
site.cfg
The phone supports international call prefix (+) with both '0' and '*'.
0 (default) - Set the international prefix with *.
1 - Set the international prefix with 0.

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English