Call Controls
Polycom, Inc. 92
Centralized Conference Control Protocol (CCCP)
CCCP is enabled by default when the phone Base Profile is set to Skype. CCCP enables users to initiate
conference calls with Skype for Business contacts from their phone, manage conference participants,
enable announcements, and lock a conference. Users can manage a maximum of 24 Skype for Business
conference calls at a time on their phone. However, users can have only one active conference call in
progress on their phone.
Centralized Conference Control Protocol (CCCP)
Parameters
The following parameters configure CCCP.
Local Digit Map
The local digit map feature allows the phone to automatically call a dialed number when configured. Dial
plans apply on-hook when no Skype for Business line is registered or when line switching is enabled and at
least one line has a non-empty dial plan.
Digit maps are defined by a single string or a list of strings. If a dialed number matches any string of a digit
map, the call is automatically placed. If a dialed number matches no string—an impossible match—you can
specify the phone’s behavior. If a number ends with #, you can specify the phone’s behavior, called trailing
# behavior. You can also specify the digit map timeout, the period of time after you dial a number that the
call is placed. The configuration syntax of the digit map is based on recommendations in section 2.1.5 of
RFC 3435.
Local Digit Maps Parameters
Polycom support for digit map rules varies for open SIP servers and Microsoft Skype for Business Server.
Use the parameters in the following table to configure this feature.
CCCP Parameters
Parameter
Temp l at e
Permitted Values
feature.cccp.enabled
1 (enabled) - Enable use of CCCP.
0 - Disable use of CCCP.
To Next Page
Loading...
Need help?
General
