System Time-outs and Settings10.4
System settings include:
• Sleep timeout
• Soft Off timeout
How to Change the 'Sleep timeout'
Sleep Timeout: Period of inactivity after which the system
automatically switches to 'Sleep' mode (see Power Management
on page 20).
To change the 'Sleep timeout':
1. As a user:
Press and select the path: Job Settings Timeout Settings Sleep
Timeout
The Sleep Timeout screen is displayed.
2. Enter the value of the 'Sleep timeout'.
Use the key [C] to clear the old setting and then enter a new
value.
3. Press [OK] to validate.
To change the 'Sleep timeout' by default:
186
| Page 186 | Jan-27-2023 01:28 |
10
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
