How to Process [Standard] Mail
In Manual weight entry mode :
1.
Press .
2. Select Manual Weight Entry and press [OK].
The following screen is displayed.
3. Enter the weight and press [OK].
The weight of the mail piece is displayed in the Weight area of the home screen
and the postage amount is updated.
4. Insert the mail piece into the system, with the side to be printed facing upwards.
Because of legibility issue, the postage imprint must not be printed on dark paper
or very fibrous paper (such as recycled paper).
The Mailing System applies the imprint on the mail piece.
3
Processing Mail
35
| Page 35 | Jan-27-2023 01:28 |
To Next Page
Loading...
Need help?
General
