Safety Requirements1.1
Power Connection
Before connection, check whether the Mailing System is suitable for the local AC power
voltage (110V - 60Hz).
THIS SYSTEM MUST BE GROUNDED
• Only connect the power plug to an outlet provided with a
protective ground contact.
• To reduce the risk of fire, use only the power cord supplied
with the Mailing System.
• Do not use ground adaptors.
• Do not use this product on a wet floor or near water.
• In case of liquid spillage, disconnect the power cord from
the outlet and proceed with cleaning.
• Use an outlet located near the system that is easily accessible. As the power
supply cord is the system disconnecting device, do not route the power cord
between pieces of furniture or over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure there is no strain on the power supply cord.
Compliance
Energy Star® Compliance
Your mailing system is Energy Star® compliant, meaning that it will help to save energy
and money while protecting the environment.
3
| Page 3 | | Jan-27-2023 01:28 |
1
Safety Information
To Next Page
Loading...
Need help?
General
