RADWAG AS X2 Series User Manual

- 35 -
• for non-verified balances – stable or unstable measurement result can be saved or printed
(regardless of stability marker
absence). If unstable measurement result is printed then it is
accompanied by question mark <?> in front of printed mass value.
8.1. GOOD WEIGHING PRACTICE
In order to ensure long lasting use of a balance plus correct and reliable measurement of weighed
loads, follow below procedures:
• Start the balance with no load on the weighing pan (permissible value of load on the weighing
pan on balance start is ±10% of its maximum capacity).
• Load the weighing pan steadily avoiding shocks:
YES
NO
• Place weighed loads centrally on the weighing pan:
YES
NO
• Avoid side loading, in particular side shocks:
NO
NO
8.2. LOGGING
Full access to user parameters and to editing databases requires logging as an operator with
<Administrator> permissions level. The logging procedure should be carried out on each switching
on of the balance.
First Log In operation - procedure:
• Run home screen and press < > button, operators database window opens with list of
available users,
• Select <Admin> option, the software activates an on-screen keyboard, use it to enter operator’s
password: „1111”,
• Press button to confirm,
• Home screen of the software is displayed again automatically,

RADWAG AS X2 Series Specifications

General

Brand	RADWAG
Model	AS X2 Series
Category	Scales
Language	English