RADWAG AS X2 Series User Manual

- 65 -
• Enter the requested value and confirm by pressing key, <Parts counting> mode is run
with automatically specified part mass.
CAUTION!
If you enter weight of value that is lower than 0.1 reading unit, then <Value too low> message is displayed.
13.4. SETTING REFERENCE MASS BY DETERMINING PART MASS
Procedure:
• Put a container on a weighing pan, tare its mass,
• Press < Determine part mass> button, <Reference quantity> editing window
featuring an on-screen keyboard is displayed,
• Enter the requested value and confirm by pressing key,
• Message on number of parts to be loaded is displayed: <Number of parts to be loaded: 18>,
• Put specified number of pieces on the weighing pan, when the result is stable ( stability
pictogram displayed) press
key to confirm,

RADWAG AS X2 Series Specifications

General

Brand	RADWAG
Model	AS X2 Series
Category	Scales
Language	English