- 62 -
12.1. WORKING MODES ACCESSIBILITY
Group of parameters enabling you to declare which functions are to be accessible. You can
deactivate functions that are not used in course of balance operation, to do it, value <NO> has to be
selected for a particular parameter.
Procedure:
12.2. RUNNING WORKING MODE
To run working mode other than currently operated one:
• press pictogram of currently used working mode, the pictogram is located in the top left hand
corner,
• wait for the available working modes list to be displayed,
• select the working mode you need to operate.
12.3. PARAMETERS RELATED TO A WORKING MODE
Each working mode has programmable parameters determining its functioning. Read point 8 of this
user manual for description of possible settings for WEIGHING working mode. Settings for other
working modes are specified within particular working mode description.
To Next Page
Loading...
Need help?
General
