RADWAG AS X2 Series User Manual

- 79 -
The report can be printed repeatedly, press < > key.
To finish density determination process, press
key. The home screen for solid density mode is
displayed. The next measurement can be started now. The balance operates with previously entered
settings (liquid, temperature) thus providing quicker start of the very measurement.
18. DENSITY OF LIQUIDS
< Liquids density> is a working mode enabling determination of density of liquid with use of
representative sample of a given liquid.
In order to operate this mode, an optional density kit (supplementary equipment), appropriate to a
model of used balance, is required. Density determination kit is the same for solids and for liquids (for
the kit description read the previous section).
The density of liquids is calculated using the following formula:
d
V
BA
+
−
=
ρ
ρ - density of liquid
A - sinker weight measured in the air
B - sinker weight measured in water
V - volume of the sinker
d - air density ( max 0,001 g/cm
3
)
Procedure for activation of Solids Density mode
Select <
Liquids Density> mode, home screen featuring liquids density pictogram in a top bar
is automatically displayed.

RADWAG AS X2 Series Specifications

General

Brand	RADWAG
Model	AS X2 Series
Category	Scales
Language	English