37
ESP-LXME Controller
Station Delay
The ESP-LXME controller can be programmed to include a delay
between stations.
This feature delays the start of the next sequential station in a program
after the previous station completes.
CAUTION: Consider using short Station Delay times, particularly
if your watering schedule or Water Window is short. Long delay
times could prevent scheduled irrigation from completing prior
to the end of the Water Window. See previous Water Windows for
more details.
Turn the controller dial to Delay Watering.
A
The Delay Watering screen appears. Press the Down Arrow button
to select PGM Station Delay; then press Next.
B
The Station Delay screen appears. Press the + and – buttons to
set the delay time (from 00:01 second to 10:00 minutes). To clear
Station Delay on that station, set to 00:00; then press Next.
Press and HOLD buttons to accelerate settings for minutes and
seconds.
NOTE: If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
1 2
Change the Program Select switch and repeat this process to set
Station Delay for other programs as desired.
To Next Page
Loading...
Need help?
General
