EasyManuals Logo
Home>Rain Bird>Controller>ESP-LXME

Rain Bird ESP-LXME User Manual

Rain Bird ESP-LXME
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
52
ESP-LXME Controller
FloManager
TM
Overview
FloManager is a standard feature of the ESP-LXME controller which
manages ow demands on the water source and can be used with or
without an actual ow sensor.
Managers of larger irrigation systems can struggle to nd enough hours
per week to irrigate the site. This issue is more prevalent today with
mandated restrictions on the number of irrigation days per week and
hours per day. Operating your irrigation system at the most ecient
ow rate has several advantages:
Decreases the overall time required to irrigate the site
Manages the ow and pressure delivered to each valve
Saves power for systems with pumps
If the irrigation system water source can support the operation of
multiple stations simultaneously, FloManager can provide automated
hydraulic management, optimizing the available water.
FloManager, working with the station priority and SimulStation
settings, will dynamically select combinations of stations to operate
simultaneously in order to utilize as much of the available water from
the water source as possible. Each station will still operate for the
programmed run time and the maximum capacity of the water source
will never be exceeded.
FloManager
TM
Requirements
FloManager will require the following information:
FloManager Flow Rate. This is the maximum capacity of the irrigation
system water source (water meter or pump).
Station Flow Rates. If you do not have a ow sensor, you can enter
the station ow rates manually.
NOTE: If the optional Flow Smart Module and ow sensor are
installed, the station ow rates required for FloManager can
be calculated automatically. Refer to FloWatch Operation for
instructions on using the Learn Flow Utility.
Set Up and Use FloManager
TM
Enable (Or Disable) FloManager
TM
Turn the controller dial to Advanced Settings.
A
The Advanced Settings screen appears. Use the Down Arrow to
select FloManager; then press Next.
B
The FloManager screen appears with FloManager On/Oselected;
press Next.
1 2

Table of Contents

Other manuals for Rain Bird ESP-LXME

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rain Bird ESP-LXME and is the answer not in the manual?

Rain Bird ESP-LXME Specifications

General IconGeneral
BrandRain Bird
ModelESP-LXME
CategoryController
LanguageEnglish

Related product manuals