81
ESP-LXME Controller
A
The Clear Programs screen appears with Individual Program
selected; press Next.
B
A conrmation screen appears. To clear the selected Program,
press and hold down the Yes button for four seconds. If you’re not
sure, press No.
NOTE: If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
1 2
C
A conrmation screen appears.
3
Change the Program Select switch and repeat this process to clear
other Programs.
Section G - Auxiliary Operation
Clear Programs
The ESP-LXME controller allows you to clear an individual Program,
all of your Programs, or to Restore the controller to its factory default
condition.
CAUTION: It’s recommended to back up your Programs before
clearing them. The ESP-LXME controller’s built in Store Programs
feature can backup one set of programs. See Section F, Backup
and Recall Programs for more details.
NOTE: Irrigation start days, Start Times and station Run Times will
no longer be present for the cleared Programs. If no Programming
exists then an Alarm will be displayed. See Section A, Alarm
Conditions for more details.
Clear Individual Program
Turn the controller dial to Clear Programs.
To Next Page
Loading...
Need help?
General
