Chapter 2: Getting Started 25
➤ To move your vessel’s position off-centre:
1. Move the cursor over your vessel’s position until the letters POS are
displayed.
2. Press ENTER to take control of the chart position. The letters POS
are now in inverse video, and the cursor symbol has changed to a
four-way arrow. This indicates that the cursor can be used to move
the chart in any direction.
D4278-1
3. Use the trackpad to move the cursor to the required position.
4. Press ENTER to select the position and return to normal cursor
control. The chart is redrawn with the vessel position at the cursor.
Alternatively, you can press CLEAR to abandon the move and leave
the chart (and vessel) in its former position.
Using FIND SHIP
FIND SHIP has two functions, depending on your system configuration:
• In full-screen chart mode FIND SHIP is used to re-draw the chart with
the vessel at the centre and the cursor homed onto the vessel.
• On a combined radar/chartplotter display, with chart and radar half-
screen windows FIND SHIP can also be used to synchronise the
radar and chart images.
Moving Around
the Chart
To Next Page
Loading...
Need help?
General