Paper > Loading Paper > Loading Paper into Tray 1
Loading Paper into Tray 1
Follow the procedure below to load paper into tray 1.
● A4/Letter size paper is loaded here.
● Load A4/Letter size paper in (portrait) orientation.
Lift the output tray.
Pull out tray 1.
● Pull tray 1 completely out. Take care not to drop it.
Squeeze the paper guides on both sides, and then adjust them according to the paper size.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0095.htm (1 of 3)2005/10/05 12:04:32
To Next Page
Loading...
Need help?
General