Troubleshooting > Printing Will Not Start > Power Cannot Be Turned On
Power Cannot Be Turned On
If the [Power] key does not light or does not blink when it is pressed, check if there is something wrong with the
power cord or wall outlet.
Check the following:
● Make sure that the power plug is firmly inserted into the wall outlet.
● Check if there is something wrong with the wall outlet. Do this by connecting another electronic product whose
operation you are familiar with.
If the above steps do not solve the problem, turn the power off, pull out the power cable, and contact your sales or
service representative. See
Where to Inquire .
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0106.htm2005/10/05 12:04:46
To Next Page
Loading...
Need help?
General