Additional Information > When Not Using for a Long Period of Time
When Not Using for a Long Period of Time
When the printer will not be used for a long period of time, turn the power off, disconnect the USB cable, and unplug
the power cable from the wall outlet.
Be careful of the following:
● The nozzles of the print-heads may dry out and become clogged. To prevent this, periodically print something.
Even if you do not print anything, turn the printer on for a few minutes once a month.
● If you do not use the printer for a long period of time, always check if the nozzles are clogged by printing a
nozzle check test pattern. Clean the print-heads as necessary, and then begin printing.
● If you do not use the printer for a long period of time, printing may not be performed normally even if head
cleaning is performed multiple times. If this happens, turn the power off and leave the printer alone for eight
hours or longer.
● After head cleaning is performed multiple times, clogged ink will dissolve over time, and normal printing may become possible.
● If there is no improvement after performing the steps above, contact sales or service representative.
● Where to Inquire
● Nozzle Check
● Clean Print-heads (Normal)
● Clean Print-heads (Full)
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0165.htm2005/10/05 12:05:58
To Next Page
Loading...
Need help?
General