Managing Logs from the Machine
You can specify settings such as the log collection setting, whether or not to transfer logs to the log
collection server, and whether or not to delete all logs.
Specifying Log Collect Settings
Enable the collection settings for each log type.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] 3 times.
5. Press [Collect Logs].
6. Select [Active] for each function: "Job Log", "Access Log" and "Eco-friendly Logs".
7. Press [OK].
8. Log out.
9. Turn off the main power switch, and then turn on the main power switch again.
Disabling Log Transfer to the Log Collection Server
Use the following procedure to disable log transfer from the machine to the log collection server. Note
that you can switch the log transfer setting to [Off] only if it is currently set to [On].
For details about the log collection server, contact your sales representative.
For details about the transfer log setting, see the log collection server manual.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] twice.
5. Press [Transfer Log Setting].
6. Press [Off].
7. Press [OK].
8. Log out.
Managing Logs from the Machine
145
To Next Page
Loading...
Need help?
General
