6. Press [Device Setting Information: Export (Memry Strge Devc)].
7. Set the export conditions.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, etc.
• Specify an encryption key.
8. Press [Run Export].
9. Press [OK].
10. Press [Exit].
11. Log out.
• If import or export fails, you can check the log for the error. The log is stored in the same location
as the exported device setting information file.
Importing Device Information
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
For details about inserting the SD card, see "Inserting/Removing a Memory Storage Device",
Getting Started.
Managing Device Information
153
To Next Page
Need help?
General
