3. Press [Administrator Tools].
4. Press [ Next] 3 times.
5. Press [Device Setting Information: Import Setting (Server)].
6. Configure the import conditions.
• Select the source for importing files. Configure settings such as the URL, user name, password,
etc., using the detail settings of the server.
• Select the frequency for importing device setting information files and set the time used for a
periodic import at the specified time.
• Select whether or not to import a device setting information file if it is identical as compared to
the last imported file.
• When the device setting information file to be imported is encrypted, configure an encryption
key.
• Select whether or not to send e-mail notification to the machine administrator when importing
fails.
7. Press [OK].
8. Log out.
• This can also be configured from Web Image Monitor. For details, see Web Image Monitor Help.
• When the managing device server is used, more detailed import settings can be made. For further
details, refer to the user's manual of the managing device server.
• If import or export fails, you can check the log for the error. The log is stored in the same location
as the exported device setting information file.
Manually Importing the Device Setting Information File of a Server
Manually import into the machine the device setting information file specified with [Device Setting
Information: Import Setting (Server)].
Managing Device Information
155
To Next Page
Loading...
Need help?
General
