If you change the setting value, [Adjust Image Density] is automatically performed before the machine
starts printing.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Black
Cyan
Magenta
Yellow
0 5 -5 1 -
• Screen dots and hairline width become thicker when you increase the intensity.
Machine: Paper Feed/ Output
0301 Correct Output Paper Curl: 1 Sided: Face Up
Specify the method for straightening paper curls on 1-sided face-up output sheets. Select the method
according to the direction and degree of curl. If the paper is curled face up, select " Curl". If it is curled
face down, select " Curl". Depending on how much the paper is curled, specify the degree of
correction by selecting "Small", "Medium", or "Large".
Setting Items Selection Default Value
Tray 1
Tray 2
2-Tray LCIT: Tray 3
2-Tray LCIT: Tray 4
2-Tray LCIT: Tray 5
2-Tray LCIT: Tray 6
2-Tray LCIT: Tray 7
2-Tray LCIT: Tray 8
Bypass Tray
Extended Option Tray
Off
Curl Correction
Level: Small
Curl Correction
Level: Medium
Curl Correction
Level: Large
Curl Correction
Level: Small
Curl Correction
Level: Medium
Curl Correction
Level: Large
Off
Setting Values
175
To Next Page
Loading...
Need help?
General
