Logging Out Using the Control Panel
This section explains the procedure for logging out the machine when Basic Authentication, Windows
Authentication, or LDAP Authentication is set.
• To prevent use of the machine by unauthorized persons, always log out when you have finished
using the machine.
1. Press the logged-in user icon on the top right on the screen.
2. Press [OK].
Logging In Using an IC Card
Log in to the machine by waving an IC card over the machine when Quick Card Authentication is
specified.
• Wave only one IC card over the machine at a time.
4. Getting Started
90
To Next Page
Loading...
Need help?
General
