Removing Staple Waste
If the staple waste box is full, remove staple waste by following the procedures stated in the animation
that appears on the control panel.
• While "Waste Staple Receptacle is full. Empty it." is displayed, you cannot use the staple function.
• "Waste Staple Receptacle is full. Empty it." is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
Removing Waste Paper
If the waste paper receptacle is full, remove waste paper by following the procedures stated in the
animation that appears on the control panel.
• While "The waste paper receptacle is full. Empty the receptacle." is displayed, you cannot use the
perfect binding.
• While "The Trimmer waste paper receptacle is full. Empty the receptacle." is displayed, you cannot
use the trimmer.
• "The waste paper receptacle is full. Empty the receptacle." or "The Trimmer waste paper receptacle
is full. Empty the receptacle." is displayed until the receptacle is reinstalled.
• If the message is still displayed, reinstall the receptacle.
7. Troubleshooting
262
To Next Page
Loading...
Need help?
General
