Rotax 912 i series Installation Manual

d05780.fm
INSTALLATION MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
00-00-00
page 7
January 01/2012
3) Abbreviations and terms used in this Manual
Abbreviations
Abbreviation Description
* Reference to another section
center of gravity
The drop symbol indicates use of sealing agents, adhesives or
lubricants (only in the Illustrated Parts Catalog).
°C Degrees Celsius (Centigrade)
°F Degrees Fahrenheit
912 iS see OM (Type designation)
912 iSc see OM (Type designation)
A Ampere
a.c. alternating current
Ah Ampere hour
A/C Aircraft
AD Airworthiness Directive
A/F Across-flat dimension
ASB Alert Service Bulletin
ACG Austro Control GmbH
AKI Anti Knock Index
API American Petrol Institute
ASTM American Society for Testing and Materials
ATA Air Transport Association
AWG American Wire Gauge
BUDS BRP Utility and Diagnostic Software
CAN Controller Area Network
CAN/CGSB Canadian General Standards Board
CPS 1+2 Crankshaft Position Sensor 1+2
CSA Constant Speed Actuator
CTS Cooling Temperature Sensor
CW Clockwise
CCW Counter-clockwise
DCDI Dual Capacitor Discharge Ignition
d.c. direct current
DOA Design Organisation Approval
DOT Department of Transport
EASA European Aviation Safety Agency
ECU Engine Control Unit
EGT Exhaust Gas Temperature

Rotax 912 i series Specifications

General

Brand	Rotax
Model	912 i series
Category	Engine
Language	English