Engineering manual - SAB 193-233-283 S A-frame (including ATEX)
12/175
008831 en 2022.02
Introduction
1.4 Amendments to the manual
2022.02 Version 7
• Table 48: Maintenance intervals has been updated (intervals for changing
coalescers).
• Subsection 6.15.3: Tightness of Sabroe equipment added.
• Subsection 15.7 Checklist for commissioning added. The list can be
filled in electronically.
• Minor updates.
2020.10 Version 6
• New subsection: 4.8 Oil injection valve.
• Subsection 4.32 KRACHT oil pump has been revised.
• Subsection 4.33 Economiser, high-stage (optional) has been revised.
• Subsection 7.24 VSD equipment has been revised.
• Minor updates.
2020.06 Version 5
• New section added: 7.19 Alignment of compressor and motor .
• Minor updates.
2019.08 Version 4
• BPU coupling mounting procedure has been added.
• Description of new KRACHT oil pump.
• Updated unit drawings.
• Updated P&I diagrams.
• New compressor name plates.
• The ‘Storage’ section in the ‘Transport instructions’ chapter has been revised.
• Various minor corrections and changes.
2018.03 Version 3
• Name plates with EurAsian Conformity mark (EAC) have been added.
• ‘Requirements for competent persons’ section has been added.
• ‘F-gas regulation’ section has been updated.
• Noise data: Add 2 dBA to the values for 60 Hz compressors (used to be 3).
• The unsigned declaration of conformity has been removed. It can be found in the oper-
ating manuals.
• And more.
To Next Page
Loading...
Need help?
General
