EasyManuals Logo

Samsung 6 series E-Manual

Samsung 6 series
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
130
Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray
players, and home theatres that do not support HDMI-CEC using the TV's remote control.
Anynet+ Requirements:
Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not
support Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
The TV remote control may not function under certain circumstances. If this occurs select the
Anynet+ device again.
Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when
those devices are either in standby mode or turned on.
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type).
With home theatre systems, however, the number of systems that can be controlled is limited to
one.
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI
cable and the device's digital audio output connector directly to the home theatre system.
A home theatre system that has been connected to the TV using an HDMI cable and an
optical cable supports 2-channel audio only. 5.1-channel audio is, however, available for digital
broadcasts with 5.1-channel audio.
Setting Up Anynet+ (HDMI-CEC)
System Anynet+ (HDMI-CEC)
Try Now
Anynet+ (HDMI-CEC)
Try Now
Enables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set to
On to enable all Anynet+ (HDMI-CEC) related features.
Auto Turn Off
Try Now
When set to Yes. turns off Anynet+ (HDMI-CEC) compatible external devices when the TV is
turned off.
"
Some Anynet+ (HDMI-CEC) compatible devices do not support this feature.
Search for Devices
Try Now
Search for Anynet+ (HDMI-CEC) compatible devices.

Table of Contents

Other manuals for Samsung 6 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samsung 6 series and is the answer not in the manual?

Samsung 6 series Specifications

General IconGeneral
Display TypeLED
Refresh Rate60Hz
HDMI Ports3
USB Ports2
EthernetYes
ProcessorCrystal Processor 4K
Dimensions (Without Stand)Varies by screen size
Weight (Without Stand)Varies by screen size
Resolution4K UHD (3840 x 2160)
Smart TVYes (Tizen)
Wi-FiYes
Screen Size43", 50", 55", 65", 75"
BluetoothYes

Related product manuals